Location: Fairhaven, New Jersey
Material: Premium Cedar
Height: 6 Feet
Design: Board-on-Board Semi-Privacy
Picket Top: Dog-Ear
Posts: 4″×4″ Pressure-Treated, Set in Ground
Gates: Custom Double Drive Gate with Reinforced Framing & Heavy-Duty Hardware

Add-A-Link Fence Company recently completed this 6-foot cedar board-on-board fence installation in Fairhaven, NJ — a large-scale semi-privacy project built from the ground up with the attention to detail that has defined Add-A-Link’s work for 50 years.

The board-on-board configuration is a proven performer: alternating pickets eliminate direct sightlines while still allowing natural airflow through the fence. It’s as good-looking from the neighbor’s side as it is from yours — a point of pride on a project this size. Premium cedar pickets were custom fabricated for consistent spacing and alignment throughout the entire run, and the classic dog-ear tops keep the look clean, timeless, and flowing.

Structural integrity starts underground. Every post is a 4″×4″ pressure-treated timber, professionally set to withstand direct ground contact and the full range of New Jersey’s seasonal conditions — wet springs, hot summers, and hard freezes. This fence isn’t going anywhere.

The custom double drive gate is a standout detail on this installation. Fabricated in-house by Add-A-Link, it features a reinforced internal frame to prevent racking and sagging, paired with heavy-duty hardware for smooth, reliable operation. Grade transitions across the property were navigated cleanly, maintaining tight, consistent fence lines from start to finish.

The natural cedar finish will silver gracefully over time — or take stain or sealant beautifully if the homeowner prefers to preserve that warm, fresh-wood tone. Either way, this fence is built to deliver privacy, security, and curb appeal for decades to come.